Lack of E-Mag Grips

[NeoApollo]

Because of the lack of E-Mag grips, I want to modify a grip to fit. Specifically, I was looking at the Eclipse Hybrid 45 Lady Gripz: http://www.planeteclipse.com/site/eS...C2=63&Offset=2 (top of the page).

Does anyone know if these will work if I just cut off the rubber holding the two sides together, fill the bottom screw hole with epoxy, and drill new bottom screw holes? Or are the side pannels too small to fit over the whole side of the grip?

[StellarRAD]

Your going to need some form of sizes, so if anyone has these just get the specs on the grips. The rest of your fix sounds correct with re-drilling holes. From what I've seen on the forms, creating your own is getting more popular. I've seen some nice looking ones. I created mine out of regular plexi-glass and used AutoCAD to create a design for it.

Put design onto grips, taped up within the design with a razor blade, and whatever wasn't tapped got sand blasted to create image. I don't have a but I'll work on getting some.

I do agree on the lack of grips.

[luke]

Humm, "lack of grips" I've been selling custom panels for over a year now (3 diffrent versions) and Devels Den took over Frymark grips. Thery are out there you just need to know where to look....

[Archangel Zer0]

mags suck get an angel or a dm4

IQ = Shoe Size?

[blykins]

mags suck get an angel or a dm4

care to explain?

[coofoo777]

mags suck get an angel or a dm4

yea, and yet you are on automags.org on the automag tech forum....
and you decide to pick a random forum to say that?

if you hate mags so much, you might want to find a different forum...

[asower]

mags suck get an angel or a dm4

MMaglpc suffers from mag-envy or is frustrated by being shot out by mag users off the break

[mixwell2]

i tried it about a year ago with all the hybrid grips they had...including the DM4, Cocker, and Shocker...and none of them really worked. At the time I did not have the Ego's so i am not sure. Either way if you do get it to fit size wise you still have to cut thru the rubber and the metal plate if you want to fit it properly/and see the LED display.

From reading other posts on this thread it seems easier to just search from premade emag grips