Mag Trouble

[WhatShouldMyUserNameBe]

I have a 68Automag Classic with a lapco bigshot, TKO bottomline, TKO Gas-thru Grip, and a 68cu Pure Energy Tank. Well my problem is, is when I was taking my gun apart (The second day I got the gun). I only took out the valve, and the trigger frame off. And when I took the trigger off the trigger rod/sear fell out. So I took a look at the video that came with my gun and showed me what to do. I managed to get the trigger rod in the right position ( I think ). So I gassed it up and fired it a few times and every once in a while the trigger rod would stick and not come out all the way and I would end up not letting enough gas out when I pulled the trigger and the ball would just barely drop out the barrel. I tried putting in the trigger about 3 more times and I still havent had any luck with it shooting right. Any ideas? Sorry for the long post.

[Arman/XPM]

David,
Why did you take the gun apart?! Second day you have it, and you already mess things up.
Lol, I hope everything works out ok.
- Arman

[WhatShouldMyUserNameBe]

I have to know how to clean it ya know! I used it at mad ivans yesterday (before I took it apart). It worked fine. Why did you sell your cocker? And for an angel!?

[Arman/XPM]

David,
You donot need to take it all apart! All you have to do is take the Valve out, put some oil on there, and you are set. It is a Mag - they last forever. This is the Angel I traded for - Armans New Angel. Complete with Air and everything!.
- Arman

Change your user name. It is too long, and messy.

[WhatShouldMyUserNameBe]

I had to take the trigger frame off because I had some gunk
between it and the body.

[Arman/XPM]

Change your USERNAME!

[WhatShouldMyUserNameBe]

Ok, Ok, Chill.... (This is David BTW).

[Expalien/XPM]

Oops, lol ok here we go. (This is David BTW)

[Arman/XPM]

Yay! You rid us of your hideous user name -

[Expalien/XPM]

Hey are you going to DFW sunday? Arman

[LawFox32]

Whats up with the XPM thing

[Arman/XPM]

Lawfox32,
Well - originally we were called Xtreme Paintball Movement, but that name is just too cheesy -:)
- Arman

[Expalien/XPM]

LoL, look what I found a pic of at p8ntballer.com. It sorta looks like your gun!

<img src="http://p8ntballer.com/classroomcontent/fastrak/08.jpg">

[Arman/XPM]

Whoa!
That is my gun! Let me find out about this.
-Arman

[SoupRman]

Re: Mag Trouble

Originally posted by WhatShouldMyUserNameBe
I have a 68Automag Classic with a lapco bigshot, TKO bottomline, TKO Gas-thru Grip, and a 68cu Pure Energy Tank. Well my problem is, is when I was taking my gun apart (The second day I got the gun). I only took out the valve, and the trigger frame off. And when I took the trigger off the trigger rod/sear fell out. So I took a look at the video that came with my gun and showed me what to do. I managed to get the trigger rod in the right position ( I think ). So I gassed it up and fired it a few times and every once in a while the trigger rod would stick and not come out all the way and I would end up not letting enough gas out when I pulled the trigger and the ball would just barely drop out the barrel. I tried putting in the trigger about 3 more times and I still havent had any luck with it shooting right. Any ideas? Sorry for the long post.

sounds like your short stroking. when firing the automag, fully pull and release in a quick movement. you have to learn the trigger. and if thats not the problem. when getting your trigger rod in the right position remember to place it behind the trigger itself. also make sure the sear assembly and rod are placed right.