ive got 2 mags, and ive fixed one but my minimag with lvl 10 is having either leaking or not shooting problems so i need live help and my AIM is dragonlane1 or you can post to give me thoughts on how to fix the problem, it goes through the foregrip and hoses fine, just it wont shoot or when i change from the carrier to a spacer it leaks, any ideas would be useful
-
-
Remove all the level 10 shims. Use the middle red bolt spring. Increase the velocity setting until it fires. If it won't fire then usually the carrier is too tight. Use the largest carrier that does not leak.Except for the Automag in front, its usually the man behind the equipment that counts. -
i bought it used so ive only got 2 springs, one from parts kit, ive only got one shim and one carrier, but ill take the shims out and see what i can doComment
-
If you have the short spring (level 7 spring), then you can use that one as well. It works well in most instances. It may not be quite as soft on the paint but will still product an antichop system that will prevent 99% of all chops.Except for the Automag in front, its usually the man behind the equipment that counts.Comment
Comment