Alright guys, here's the deal. I've got an RT Pro with lvl10 and ULT. I've changed a lot of things since I got it, but I keep getting the same problem. Somehow, somewhere the recharge rate is slow. From the beginning if I try rapid fire gun drops below operating pressure and the sear pin either never comes back to the trigger, or is very slow in doing so. Or sometimes the sear will move back and forth like it's pressurized but the bolt doesn't shoot forward. I knew something was wrong with the recharge by the way it was operating before, but now I can see it on the gauge on my new AGD flatline tank. I'm probably going to drive over to ADG and hand it to a tech, but I thought I would check and see if there was something obvious or simple I'm missing.
Slow/faulty recharge
Collapse
X
-
Possibley you need more shims in your ult, i had this problem before. RogueFactor says he uses 5-6 shims. :)Comment
-
yep, sounds like the LvlX or the ULT needs fine tuning...
I would bet its the Lvl X carrier to small maybe need more/less Shimes.
Little_HoComment
-
Thanks guys, I had a chance today to sit down and mess with it. I fine tuned the lvl 10, ULT and input pressure, and I think everything's going to be ok. I believe I'm finally coming to terms with my new mag, and the healing process has begun. *Says to RT pro* "No really, I only called you a useless peice of *%@$ because I love you, and it's my way of expressing it"Comment



Comment