X-mag problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • JESTER22
    Registered User
    • Jul 2005
    • 18
    #1

    X-mag problem

    I have an X-mag that does not fire all the time on electic mode. the battery is fully charged it will fire a couple of shots the stops then starts firing again. it seems as if the battery is very low or flat. but checked the volts and it is fine put it on another e-mag and it is working fine so it is not a battery prob.

    any ideas anyone?
    Tags: None
    • athomas
      Of course it works-its AGD
      • Jan 2002
      • 8039
      #2
      Check you wires. There could be a pinched wire somewhere. Also, check the screw holding the board to the frame. Clean it out to make a good electrical connection.

      Also, check your trigger settings. Maybe your trigger magnet has shifted or your stop point is too close to the actuation point.
      Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        • Demonio
          Just Another Ageing player
          • Jul 2001
          • 557
          #3
          Did you check your ACE Setting?
          0- for off
          1- Solid 1 color balls
          2- 2 color balls

          and or you may want to adjust the ACE sensitivity

            Comment

            Previous template Next
            Working...