Mini mag not firing ???

[Soopa Villain17]

i got a mini mag today , it has a lab hurricane valve o nthe back with the 8 hole thingy . well i aired it up and the trigger pin wouldnt move very far , not enough to fire the gun. i figured the on/off was sticking so i lubed it , now it leaks , so i took the back half of the valve off and lubed it , still nothing . please help me

[Soopa Villain17]

30 views and no1 can help me ? how lame, please guys , i dont know much about mags and i really need your help to fix this , thanks

[Stoble]

I would measure the trigger rod length to see if it has been modified. And check sear for wear. If you've got another sear, try swapping it.

And where is it leaking out of?

[Soopa Villain17]

out of the barrel

[Coralis]

Does the sear move freely ? Is the trigger rod the correct length ? Is the velocity of the marker turned up ? (i would try this one first) Lastly have you check the AGD website debugging checklist ? http://www.airgun.com/debug.shtml

[Soopa Villain17]

the sear does not move freely , i cant check the lenght or anythig cuz the front screw is stripped , and i dont have acces to the right tools tonight, im getting really frsutraded

[Alpha]

Use a hacksaw and put a slot on the screw and try to get it off that way

[barjohn]

pictures would help out. sounds like you are having problems with your sear so you need to get the right tools to check your sear out.

[Soopa Villain17]

i figured it out , it was the little oring behind the coil thingy thats behind the power tube tip , but it leaks so im just gunna get a new o ring kit , thanks for the help

[Maggot6]

Leaking - hold the trigger down, does it still leak? Yes = Bad on/off orings...No = Powertube spacer

go into more detail :)

[Soopa Villain17]

SpitFire1299 helped me out over aim , thanks guys shes shootin good besides the little leak