Leaky Mag!!!!!!!!!!

[wishone]

ok thanxx alot man ........ im going to do this in a bit ... i will post up pics and maybe a short video ....... digi needs to charge first ........again , thanxx alot alot alot ... your help is tremendous

[athomas]

Take the back apart and give it a good cleaning, especially around teh regulator piston assembly. Are you sure you put a new regulator seat oring in? A hot shot followed by weaker shots is usually an indication of a bad reg seat oring.

If you are still getting a leak down the powertube, change your powertube oring. If it persists, then use an even shorter spacer. Check your sear. If it is showing signs of wear on the tip, it may need to be replaced. This could be part of your leak problem due to the bolt sitting too far forward.

Replace your bolt spring. An old bolt spring could be worn and weak. It would cause bolt stick and lead to drastic shootdown after the first shot.

[wishone]

thanks . whats the best oil you guys recommend for my mag?????????

[Kwaidd]

chuckle, i just use the ol 3 in 1 =p although im sure there are some others that are maybe more specific to the markers.

[Head knight of Ni]

KC (Kermode Concepts) trouble free.

[wishone]

KC (Kermode Concepts) trouble free.

wow !!!! so0 i still cant figure out were the damb leak is comming from .... some from down the barrel and some from the vavle ....... dammit !!

my computer doesnt let me let me view the diagrams from the agd website so i really cant tell which seal is which.and it doesnt show you the names of them .... can one of you guys post up a big picture of the valve and each seal i shouldve changed ...... the exploded pic would be the best ..........and some1 above also mentioned something about the sear seal of something ?? which one is that .... please help i really wanna get back on the field its been about a month !! thanks again guys for all your help and helping a newbie out !

ps both leaks stop when the trigger is held down after a shot ..

[wishone]

holy sweet jesus !!!!!!!!!!!!!!!!!! i got it !!!!!!!!!!!!!!! ................ LOL im so excited !! .... so i took the gun apart one more time ..........and i started taking a really hard look at it . making sure im not missing any orings to replace... come to find out that theres an oring that sits behind the spacer !!!!!!!!!!!!!!!!!!!!! i had no idea there was one there ! so i pulled it out and luck has it that it was cracked !!. so i replaced it with a new one and kazzam !! no more leaky mag !!!





thank you guys for all your help ........btw how much do you think i could get for my gun .........i see bone stock 68's on ebay for like 180$ .......... so0 i shoukld be able to get a little more for mine right ....... more or else ..... with all my gear and N2 tanks and all that stuff .......... thanks a million again guys ! i will be playing this sunday ill let you guys know how it goes ............im still trying to host a couple good videos but putfile sucks !! LOL

[Trogdor151]

holy sweet jesus !!!!!!!!!!!!!!!!!! i got it !!!!!!!!!!!!!!! ................ LOL im so excited !! .... so i took the gun apart one more time ..........and i started taking a really hard look at it . making sure im not missing any orings to replace... come to find out that theres an oring that sits behind the spacer !!!!!!!!!!!!!!!!!!!!! i had no idea there was one there ! so i pulled it out and luck has it that it was cracked !!. so i replaced it with a new one and kazzam !! no more leaky mag !!!

Was this o-ring behind the regulator seat or behind the brass spacer??????

[wishone]

Behind the brass spacer..........hahahaha ....... still excited !!!

[Trogdor151]

Is there an o-ring that goes between the reg seat and the back half of the valve???

[wishone]

There should be 2 if im not mistaken ...... i small thick plactic one in the middle and then the bigger one that goes around the threaded portion .. i might be wrong

[Coralis]

That Oring under the spacer is called the Power Tube Oring

[wishone]

WOw !!!!!!!! i cant believe this crap !!........ i went to play yesterday .... and she started leaking out the back ........ from the middle of the adj. screw ...... i lossend it but it would still leak ........ i shot once and it goes away for about 4 seconds and then starts to leak again !!!!!! i dont see an oring in the back ??? wtf is going on .. if its not one thing its another LOL ......... but i love the gun soo much !

[Coralis]

If its leaking out the back adjusting hole youll probably need a regulator piston . But first you can unscrew the adjuster all the way out remove the valve spring( remember which end is which on this) and push out the regulator piston with a small allen wrench (through the hole where the regulator sits on the back half of the valve). Replace this Oring on the brass regulator piston, oil it and reassemble the back portion of the valve. Air up and turn up the velocity until the gun starts to shoot and check to see if its leaking any more , if this cures your leak good, if not youll probably need to replace the brass regulator piston . You can order them online at http://store.airgun.com/index.cfm?fu...&categoryID=18

[athomas]

Definately looks like a weak regulator piston assembly.