Why the two holes on the bottom of mag?

[Rottindog]

I have read all the posts about oiling the gun. Why does my mag have two small holes on the bottom that say "oil" between them if we are only supposed to add oil through the ASA?


Thanks

Branko

[SpitFire1299]

You can oil it there too..

[barjohn]

there are many different ways to oil an automag.
the following ssentence is taken right out of the mini-mag users manual about those ( oil holes)


We find that customeres who properly liubricate their paintball markers once a week have the fewest problems. To lubricate your 68AUTOMAG/MINIMAG properly, drip 4-6 drops of AUTOLUBE into the air inlet closest to the valve. Then gas up and dryfire the paintball marker several dozen times with the barrel removed ( to prevent oil build-up in the barrel. In addition, once a month remove the valve body and sprat oil into the holes marked -OIL-. You may also use automotive grease ( I.E. wheelbearing or any light grease) on the spring pack and Regulator Piston O-Ring.


you can download manuals at http://www.airgun.com/Images/automan.pdf