Predator Morlock Eyes

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SpitFire1299
    :P
    • Jun 2004
    • 1765
    #1

    Predator Morlock Eyes

    Im trying to install my predator morlock board, and im having some problems. Its for my hyperframe.. for my automag. Im not using eyes, and im sure that all the wires are plugged in the correct places. The settings are at the default (I Think..). What happens is, I turn the board on, and i pull the trigger. The solenoid(For sure works..), doesnt click, and the light just flickers. Im thinking the eyes might be on, but i cant turn them off since all that happens when i hit the trigger is the light flickering.

    Please Help!!
    Last edited by SpitFire1299; 11-04-2005, 10:02 PM.
    Tags: None
    • athomas
      Of course it works-its AGD
      • Jan 2002
      • 8039
      #2
      Is your solenoid connected properly? One wire should be connected to the battery (+) and the other wire should be connected to the solenoid output control from the board.
      Except for the Automag in front, its usually the man behind the equipment that counts.

        Comment

        • Majinebz
          Registered User
          • Sep 2004
          • 295
          #3
          I had the same problem with my predatored hypermag frame. on top of what athomas said, You should have a ult installed in your valve to help the life of the solinoid and also make shure your dwell is high (15 or so MS) mine would not fire at all if it was not that high. Hope this helps EBZ

            Comment

            Previous template Next
            Working...