Rapid Fire?

[Narizo]

Okay so I just bought an AGD flatline, a ule body, tuna rail, rt pro sear... I prev. had an xvalve and intelli frame already.

When I aired it up for the first time sense upgrading, i got no air to the trigger but the gun just started firing, awkward huh... but anyway i was like screw it i wanna see what this can do cuz it was essentially rapid firing but I wasn't doing anything, obviously a problem. So i threw my halo on there and indeed it did rip and the lvl 10 was working still, but no air to the trigger and constant firing = no good.

Help hehe, I have no idea, obviously i didn't put something together right?

Any ideas/suggestions?

Thanks


EDIT: I suppose I should mention it seems to be leaking from the bolt.

Alright so this time, I aired it up, had the trigger down when i turned it on, and i got strong resistance against the trigger, but when i'd let go it would leak out of the bolt essentially again, but no luck.

[Coralis]

You might want to shoot Tuna a email if you bought the rail from him. The only things I can think of is too many spacers in the ult (assuming you have a ult) or the trigger rod is severly out of adjustment or and on/off that is too short....I"m assuming that the new rail is a modified RT pro sear since you have a RT pro sear the RT pro rail requires a .765 on/off pin as oppose to the .750 on/off pin on most other setups

[Narizo]

You might want to shoot Tuna a email if you bought the rail from him. The only things I can think of is too many spacers in the ult (assuming you have a ult) or the trigger rod is severly out of adjustment or and on/off that is too short....I"m assuming that the new rail is a modified RT pro sear since you have a RT pro sear the RT pro rail requires a .785 on/off pin as oppose to the .750 on/off pin on most other setups

I bought the rail used, no ult either... I just assumed i'd beable to put everything together and it would work but has not worked like that at all and just kinda conflustered on what I did, or didn't do.