emag issues urgent

[ghostdog2019]

I have my emag shooting really well in emode and hybrid mode except for excess chopping. Now my level 10 was working before and it never chopped but after playing today I noticed tht almost every 5 shots was a break. I have a empire reloader B so it isnt about balls not being fed fast enough. I did notice after I put the emag to rest and brought out my backup and swapped out valves that the x-valve had a slight hiss down the barrel if I had my finger resting on the trigger. I would shoot and that would clear up. I have a tournament on the 26th of november and really want my emag working with full force. If anyone can help that would be greatly appreciated.

Thanks
Mike Brothman

[Coralis]

Were the breaks actual chops or were they barrel breaks..... if they were barrel breaks perhaps your ball detent needs changing if they were chops then your level 10 needs retuning . The leaking down the barrel you need to determine if its your on/off or if its your level 10 setup

[athomas]

If it only leaks down the barrel when you rest your finger on the trigger, then remove a shim or two from the level 10.

Definately check the paint to barrel match. Use a larger bore if possible.