What VALVE is this?????????

[Bear_Claw]

Ok just picked up a mag AGAIN (i really missed my old one)

Basically its a MINI MAG with a Classic MAg vlve with Level 10. Its got a Intellie frame and Blade trigger shocktehc flame drop to a on off asa and a Dye Forgrip. Have both a Smaprtparts Progressive barrel and a dye boomstick (I think) barrel both 12". Oh and a 72/3000PSI HPA tank.

My qustion is i also have a second valve labeled on the Side as a RT PRO with an X printe in behinde the RT symbol.

Is this just an older X valve or a RT valve?

Also its has no ON/OFF OR THE FRONT BOLT THING (THE PEICE THAT SLIDES OVER WERE THE LEVEL TENS IN STALLED AND THE SPRING SLIDES OVER IT). If i buy a second Level ten and a ULT Trigger pull kit i should be god to go correct as those upgrades replace the missing parts right?

Heres the only pic i have at the moment more to come once i get a hopper elbo for it and can show a full pic.



Happy to be shooting A MAG AGAIN ALTHOUGH THE PHANTOM WAS A BLAST THE MAGS AN ADDICTION lol.

[RTspag]

it "looks" like a regular rt pro valve from the pic, which would make it similar to a e-mag valve minus the quad o-ring, but it won't take a ULT. the valve section looks black/dark in the pic though, like a x-valve though.... so not sure.

[benzy2]

It looks like it is a new x valve that is put on the ule rt customs. they come with an rt/xvalve. From how it was explained to me it is like every other xvalve but was just placed from the factory on a rt. It should use anything a x valve takes as it is an xvalve. Its like the difference between the old rtp valves and the emag valves. Same thing but different label.

[barjohn]

looks like an RT X-valve and i think they are compatable with the ULT kit. But it looks like you have a bolt and spring on there. so looks like all ya really need is the ULT>

[Dayspring]

It's an Xvalve. Trust me.

And it WILL take the ULT.

[peewee]

Sweet little setup!!

[Bear_Claw]

Naw tha bolt and spring is from the classic for the pic only. It shoot great with the Reballs i have at home hopefully i ge out next weekend to try it out with real paint.

I used to have a Vert Feed Mini then converted to power feed right classic with a intellie frame then traded it for the phantom. Now i traded the Phantom for a better mag LOL. But im not really eperianced with mags tehcnically and this is my first RT/X vlave so i dont know a whole lot on what i need to get it working again. I think i need just a ULT (to replace missing On/Off) and a Level 10 Kit to replace the missing Bolt a drive spring. Dont know if i can just swap the missing stuff i need from the classic valve to the Rt/X valve.


Oh and i have come to the conclushion that it is an x-valve with the help of all you guys and the fact that shes real light compared to the Classic valve LOL.