ive had stripped screws before, but i have never had one like this where you dont have as much clearance for an allen wrench or drill.
what method should i use to get out the screw?
what method should i use to get out the screw?
-
"Ah yes, I have one of the 32*rebels that I always take to big scenario games. It keeps the truck from rolling if I have to park on a hill." - automikey -
weld a new head onto it and out she comesEuro E-mag | TL63 | XMOD| EM01610
Euro Rt | OG | RT02382. -
dremmel a slot in it, and use a short screw driver.
or epoxy a allen wrench in it, then try.upgrade fund: $145
Comment
-
well i dout that i would try this but i have tooken a hammer and either a philips screw driver and making a indent in the screw the twist it out but i dout that you will be able to do that
i say wither weld the alen into the screw enough to screw the screw off.
and the go to your hardware store and by a thread tap
"Let them eat war [x2]
~my e-mag~
~ule frame~
~ule rail~
~x-valve~
~3.2 software~
~polished no-rise body~
~black 10" freak kit~
~smoke halo b~
~Fl05283 68 3000 flatline~
That's how to ration the poor
Let them eat war [x2]
There's an urgent need to feed"Comment
-
atm 'tooken'?
As wanna stated, epoxy an allen wrench into the screw. Let it harden and then unscrew it. You lose an allen wrench but you remove the screw.Comment
Comment