Quick HELP ME!

[turtlepaint]

Hi , i just replaced every damn o ring in my valve and it still leaks down the barrel! when aired up it is fine when trigger is in and then as soon as i let it out it starts hissing. ??? im supposed to be at the field in a 1/2 hour

[rb211]

Lvl X or Lvl 7?

[turtlepaint]

help

its a level 7

[rb211]

Do you have a spring or a solid spacer in the power tube?

[turtlepaint]

spacer

a 225 spacer

[rb211]

Well, I know you said you replaced all o-rings, but you might want to put a new one in the power tube and try again. Make sure that there isnt any debris in the power tube. Make sure you are putting some oil (5-6 drops) in your asa before you gas up on the new o-rings. Is your sear in good condition?

[Beemer]

yup

Its in the power tube

[turtlepaint]

S*** F*** B**** C*********

ok after recleaning the power tube and making sure the ring sat right i aired it up let the trigger out and wow no leak- took the first shot and it started leaking again i am now at 2000 psi on my tourney tank so reguardless im going to have to drive across town to fill my tanks but anyway..

[turtlepaint]

oh

oh i oiled it too

[rb211]

Well, the only things that are coming to mind are 1. the power tube spacer is too big - if you have one, go with the .220 spacer, or 2. your sear is worn or out of adjustment. Are you using a AGD bolt or an aftermarket bolt?

[captian pinky]

it is the powertube if u have the spring i would recommend tring it if not then go through every spacer u have

[turtlepaint]

okey dokey

i do have a new spring ill try that too as far as spacers it always worked fine with that one be4 but back to the workshop

[turtlepaint]

bolt

Well, the only things that are coming to mind are 1. the power tube spacer is too big - if you have one, go with the .220 spacer, or 2. your sear is worn or out of adjustment. Are you using a AGD bolt or an aftermarket bolt?

Its all agd stuff

[turtlepaint]

sol

nope same deal i aired it up let out the trigger and it had a little leak after first shot it all came back. Do you need to change spacers ever?

[rb211]

Gas it up again. Take your squeegee and push on the bolt and seeif that stops the leak. If that stops it, you might have a bad sear.