qloader

[mcclare]

Hey guys, I posted this in pbreview but havent had any answers yet and I figured some mag owners may know this. I want to mount a qloader to the front grip (regular grip, not an emag). I want the pod to sit parallel with the barrel. In doing this, is it possible to have the hose come up the left side of the gun? I want to use this with a warp left body.

thanks

[1337caesar]

Hey guys, I posted this in pbreview but havent had any answers yet and I figured some mag owners may know this. I want to mount a qloader to the front grip (regular grip, not an emag). I want the pod to sit parallel with the barrel. In doing this, is it possible to have the hose come up the left side of the gun? I want to use this with a warp left body.

thanks

I could never find a way other than cutting a part of the metal clampy bit off to accomodate the fitting.

[mcclare]

Was it still held tightly onto the gun? I don't have the qloader yet so I can't really mess around with it.

[jwalker87]

not really. Get a warp-right body and a 90* elbow for the body; i have a pic of my mag with a warp-right body and a qloader, its dead sexy. Gimme a minute and ill find it.

[jwalker87]

here you go. Its the blue warp-right body

http://www.automags.org/forums/showthread.php?t=141156

[Loguzzzzzz]

If you get the CMS the housing rotates 360'. This is what I used on my warp left markers (2). Check out the pictires on their website. The last three posted are mine. My Z gripped Mag, Y gripped Mag and my Timmy clone. You will notice that both of the mags are mounted on the side.

http://www.qloader.com/info/players.html#more_pictures

I use the CMS now on all of my guns.

You could try this method

[mcclare]

jwalker, what you have is exactly 100% what I want with mine only on the left. I have some plans for the right side right now. That's exactly what I was envisioning though. It looks awesome. Do you have any idea how it would look with the same setup only on the left using a CMS? Does the CMS move it further out at all? Loguzzzzzz said that it would rotate 360', so that should work just as well wouldn't it?

[mcclare]

also jwalker, what did you use for elbows there out of the feed? It doesn't look like a regular qloader elbow

[M98Punk]

not to steal the thread but I as well am waitin for a Q and I'm gonna mount it on my micro..anyways Loguzzzzzz your mag is hot! How stable is the Q mounted like that? and did you need the custom mount to do that?

[Loguzzzzzz]

not to steal the thread but I as well am waitin for a Q and I'm gonna mount it on my micro..anyways Loguzzzzzz your mag is hot! How stable is the Q mounted like that? and did you need the custom mount to do that?

What I do when in a game is to hose clamp both joints, the one on the warp and the other on the Q-Loader socket. When these clamps are on the thing is rock solid, even when running, jumping or sliding!

That is a standard socket that I cut the mounting point off of for looks only.

Let me know if you want any more info.