Automag RT Troubleshooting

[Kyle.Kimber]

My original RT is leaking, PLEASE HELP ME. My Rt is leaking through the back of the regulator nut. I have a lvl 10 installed with the standard bolt Spring. I don't know how old the O-rings are, but they're all yellow and all nasty. My mag has never seen co2 (pretty sure, thats what the dude I bought it from told me) and I cleaned, and polished the bolt and other internals, and greased the O-rings. I hear that part kits are either really hard to find, or ungodly expensive. Its the standard valve on the RT, not sure if that makes it a ReTro Valve. Please Help. Also tell me if its a ReTro Valve or not.

Thanks

[geekwarrior]

out the back of the gun.....did you try turning your velocity down a little?

[Kyle.Kimber]

out the back of the gun.....did you try turning your velocity down a little?

Yeah, I tweaked the velocity, it stopped for a little while, then it started up again. I also tried tweaking the velocity with a combination of the different bolt springs which came with my lvl. 10. But nothing seems to be working. I am wondering if it has to doe with the bore sizing on my lvl 10, but I had that check professionally after I had installed it.

[Bejita]

You need a new regulator piston........It will fix everything.

[11 Bravo]

Did you tweak the velocity down a little or did you turn it down. If you just did it a little, turn it down more.

[Kyle.Kimber]

Did you tweak the velocity down a little or did you turn it down. If you just did it a little, turn it down more.

I tweaked the velocity A LOT, I almost went through an entire n2 tank.

[Arstron]

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=112&categoryID=23

RT Regulator piston