RT ULE problems

[skriptal]

I bought an used RT ULE (intelliframe, xvalve, level 10, ule body,ULT). but the gun is not working. when i gas up the gun, it sounds like it is hiccuping. It fires a few shots then does nothing, i cant fire or anything. I don't know what is wrong, please help.

ohh and the seller did not send me any of the parts needed for me to help tune the gun, springs, shims, ect, so links to anything which i would need to change you would have to send me to a link to buy.

[peewee]

First off put about six drops of oil in the asa & try firing it a few times. Whats the pressure in your tank? Does it have the ULT?

[skriptal]

the pressure in my tank is down to about 1.5k psi now, and when i put the dops of oil in the asa, now i am getting the leaking down the barrel problem, but it was werid because sometimes i could get it to stop but the gun would still not fire, i would push down the trigger and the rt part would pop it back up. then i would hit he gun and the gun would fire once and i would push down the trigger and the rt part would pop back up, or the leaking down the barrel

[pachytriton]

Yeah tuning should fix this. Get a shim pack for the ult and maybe for the level 10, get all the level 10 carriers and springs. That's what you get for getting a mag on pbnation instead of ao, lol. (saw your thread there). Get the parts from agd, or tuna. Stinks he sent you a gun that needed tuning but didn't give you the parts. Good luck.

[skriptal]

Thank you for all your help.
I think i am going to be getting,

2 6 packs of the L10 Shims
1 Med Bolt Spring
1 uncut Bolt spring
L10 carrier sizes .5-3.5

Is there anything else i should get?
Should i get a powertube spacer kit? or are they for older mags? Link