HaloB Problems..

[SpitFire1299]

Ok.. so i own a halo b, with all stock stuff. The board was just bought because the old one's button fell off.

Anyway.. so i push the button to turn it on, and it just keeps spinning. Then to the left of where it says J2 (by the connectors on the board) it gets REALLY hot. I unplugged it very quickly. The eyes were not working either.

What im sure of- Im sure that nothing is in the way, causing the halo to jam. Also i just cleaned it(i have cleaned it many times before). Also, im pretty sure they wires are plugged in correctly from using this picture-

http://www.odysseypaintball.com/images/tips/connectors.jpg

PLEASE help.

[11 Bravo]

Are the eyes taped in good and snug?

[BigEvil]

You could have a faulty board. If possible, try borrowing one from someone and try it in your halo then go from there.

[SpitFire1299]

You could have a faulty board. If possible, try borrowing one from someone and try it in your halo then go from there.

ARG.. i hope not, i just bought this one. Ill try that though, but any other ideas? Also my eyes are snug.