RT Pro issues,

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wzyrddy
    Registered User
    • Jan 2006
    • 26

    #1

    RT Pro issues,

    I have a Rt Pro with the lvl 10 and the ULE with 5 shims. I cant get the trigger to sweetspot ar react at all. Any ideas?
  • Cow hunter
    300fps=204.54mph
    • Aug 2005
    • 1521

    #2
    ULE needs to have a total of 9 shims to sweetspot normal shim equals 2 ULT shims

    so you need a combo

    3 normal shims = 6 ULT shims
    so 4 normal shims and one ULT will make it sweetspot, or any other combo
    any more than 9 could cause problems, such as the valve not sliding into the body

    when i did this i was only get it to work once, which was WOH sweet but then i couldnt seem to get it again.
    /note; you need to have a nice/perfectly tuned lvl10 or bolt stick might be a big issue

    Comment

    • Dayspring
      aka- The Day Wang

      • May 2001
      • 9664

      #3
      Take out the ULT. You'll get a better response.

      Comment

      • lifeguard_12_86
        Registered User
        • Mar 2004
        • 81

        #4
        make sure your not running lp tank, and that you dont have anything retricting your air line, i had a bad evil on/off and had the same prob till i went back to my old regular screrrw in and she worked like a dream
        Classic Automag w/AllAmerican barrel and ACI 6stage xchamber
        98Custom w/Lapco Big Shot, Rocket Cock

        Comment

        Working...