who likes their mag??

[finnmanpa]

Reliability

Hi yall, I've got a couple questions.
how many of yall like(or love) the tac one/x valve and level 10?
is it worth it or should I get a ION or A-5 with a reactive trigger?
I really want a Mag, but i would like to know if its worth it, how much trouble do yall have with these guns? do they leak alot? how easy is it to fix the problem, howlong does it take? would you rather have another marker?? thank you for your help.
I'd like to put an 18 inch FREAk kit on a tac one with a Empire-B hopper.
thanks again yall!!

I got my Mag back in '94. It is still a level 7, bone stock. I have played tournaments, rec, scenarios, all types of play. I have only ever used HPA with it, never once CO2. I set my velocity once back in "95 to 278fps at a tournament and have never had to set it again. I clean and lube my gun after every day of play, and have never had to replace a seal or ring, only a few bolt springs which natually lose their tension after awhile anyway. (I run about 2 or 3 cases a month through it) I have had other markers all though the years, but none that I have kept as long as my Mag. In fact right now I only have my Mag and an '03 Cocker, which I use only as a loaner gun to friends. Mags are simple and reliable, period!

[dIVEANX]

I have to say, I just got my TacOne not too long ago and I swear the more I shoot it the more I love it.

I am used to shooting Cockers and my Viking.

It my not be as efficent or as light but I just feels so good in my hands.

I can shoot what I carry so Im good LOL

[HamMan]

.

exactly how long does it take for the LvL10 to "break"in?
can goin out in the woods, shoot a case of paint speed things up??

[Phantom_Mag]

me.

[11 Bravo]

exactly how long does it take for the LvL10 to "break"in?
can goin out in the woods, shoot a case of paint speed things up??

Yes.
And once you break in that oring and find the right sized spacer, you wont have to mess with it for a very long time.

[BigEvil]

[sarcasm]I hate my mags, the 4 i own, and the other 2 that I dont anymore. HATE HATE HATE.
[/saracsm]

[REDRT]

exactly how long does it take for the LvL10 to "break"in?
can goin out in the woods, shoot a case of paint speed things up??

I set both of mine up once and haven't had to dink with them again. It has been 2 years. I would say 2-3 cases it is broke in. Your going to know by then if changes will have to be made.

[shades]

Same question CLICK HERE

[HamMan]

?

can i put a ule body on a tac rail?
I want a classic looking mag. but with an X-valve,
how much more is the x valve consistant/faster than the classic that comes on the pro classic??
and can i put a ult on it?
any money saving suggestions would be great!!
THANKS A MUCH

[personman]

can i put a ule body on a tac rail?
I want a classic looking mag. but with an X-valve,
how much more is the x valve consistant/faster than the classic that comes on the pro classic??
and can i put a ult on it?
any money saving suggestions would be great!!
THANKS A MUCH

There's kind of no point of buying a tac one if you're going to replace the body. Go with a ULE Custom if you want a ULE body. Or there are other configurations you can buy, check out www.themagsmith.com and see the custom marker builder and the paradigm.
The xvalve is alot faster than the classic (the classic valve on the proclassic is the same valve in all of the other types of classics, and minimags) because it has a reactive trigger and the design lets the valve recharge faster too. Yes you can put a ULT in a classic but you had better get the hang of pulling a mag trigger first because it will be easily shortstroked (when you dont pull and release the trigger all the way and the gun kind of 'half fires')
My suggestion is get an xvalve, the ULT is not a nessecity, and not everybody likes it. You might find that you like the reactiveness of the stock on/off more than a softer trigger.

[HamMan]

...

right I did some mathe and figured it would accually be less expencive for the tac one ..than starting with a pro classic.
whats a ULE custom?? is that the same as a pro classic.

[REDRT]

whats a ULE custom?? is that the same as a pro classic.

I think what was ment was the RTpro custom. Base AGD price is $355 I believe currently. Decked out it falls in cheaper than the tac-1 because it uses the ULE body instead of the tac body. Tac body drives the price up.

[logicmag19]

Depends what type of play youre going to be into. If you want a sturdy gun that will last a few years atleast get a mag. If you want one with some speed either the ion or rtpro, emag/xmag. A5 I wouldnt waste my money on. It all depends on you. Now no more threads like this. Search, everyone makes these and answer the same questions.