Trouble with Mag

[Little_Ho]

Hi there,

ok i had last week a problem with my Mag. I need to say it was cold if that makes any diffrents.

Ok i gass up my Magand start shooting. everything went well for a little bit. Then it startet to not shooting.

So i degassed it and gassed it back up and its working fine like nothing is wrong.

Then i fiered a couple of shoots and wait maybe 5-10sec and try to shoot again and nothing. i have no pressure on the Trigger. I turnd the Air off and on then the same thing. Shoot wait a few sec and nothing.

I started to change chimes in the ULT but nothing changed. The last i could think of was the spring in the Level10 and i did put the short Spring in rechronod and it was working.

So the Mag is still not running round. But what else can i look for????

I oild the **** out of it. I have not tried anything else so far because i had no time.

My Setup:

Warpfeeded ULE X-Valved Level10 and ULT installed chimera Frame Mag.

Can someone help me??

Thanks

Little_Ho

[snoopay700]

Could you be short stroking it and the bolt is sticking? I'm not totally sure about this problem.

[nyarlathotep]

hpa or co2? im guessing its hpa, is your tank filled to more than 800psi? my classic would shoot a couple times, and then suddenly stop, the trigger rod was still out, and there was pressure but it wouldnt shoot. try a different tank?

[neppo1345]

Make sure the tanks screwed all the way in...if it comes unscrewed you'll get similar symptoms

[Little_Ho]

Ok sorry but i forgot some things.


The Mag runns HPA, its an Flatline Tank 68/4500 set to 900psi output, and i filled the Tank up got paint and run onto the Field. Then theing above happend.

Its just frustrated when you get out and teh SuperMag is not working right.

And like i said its just after a few seconds it stoped working. I used the smaler spring and it was a little bit better but not good. Sometimes it sounded that the Air got into the Vlave was hissing in. Not a nice sound and everybody was looking weired.

Still need some help.

Ill try to work on that this week.

Little_Ho

[nyarlathotep]

maybe its the reg seat? check to see if its dirty or better yet replace it anyway.

[Little_Ho]

Hi there,

ill try to check the reg seat asap.

Thanks for the tipp.

Little_Ho