first off, let me say that i think this is evenly between the lvl 10 and the ULT, so i'm just making my own thread.
when i fan my trigger, with the ULT installed, the gun will get off a few shots, then it will chuff and get boltstick pretty badly. when just pulling the trigger quickly though, its fine.
i have tried everywhere between 3 and 5 shims in my ULT because there is no reactivity when i use that many. and i am useing the red spring on my bolt. I had to put tape under an o-ring so the bolt wouldn't get hung up in my barrel.
i can fan the trigger fine with no ULT, and it goes very fast because of the reactivity.
with the short lvl 10 spring i will chop. the red spring is good.
what should i do to help this? get trigger stops?
when i fan my trigger, with the ULT installed, the gun will get off a few shots, then it will chuff and get boltstick pretty badly. when just pulling the trigger quickly though, its fine.
i have tried everywhere between 3 and 5 shims in my ULT because there is no reactivity when i use that many. and i am useing the red spring on my bolt. I had to put tape under an o-ring so the bolt wouldn't get hung up in my barrel.
i can fan the trigger fine with no ULT, and it goes very fast because of the reactivity.
with the short lvl 10 spring i will chop. the red spring is good.
what should i do to help this? get trigger stops?
Comment