It's been a while...leak down the barrel.

[Skoad]

Been a while since i've owned a classic...or a mag at that. Anyway I got a pretty hardcore leak down the barrel. If I pull the trigger back just a smidge, it either stops or slightly hisses.

I know it could be a few seals/orings but my question is, if the sear-trigger pin is too short will this cause a leak down the barrel?

[electriceel125]

Does it have a LvL10?

[nyarlathotep]

might be the wrong spacer or something

[skriptal]

it sound like its in the power tube, if its lvl 7 you need a smaller powertube spacer. If its lvl 10 you need a smaller carrier.

[Skoad]

nope no level 10. might have to pick up a spacer kit i guess.....if the oil bath doesn't fix it.



but I did tweak the trigger/sear a bit, not sure if that has to do with it or not.

[skriptal]

dumb me, before you do anything,
1.Put some paintball oil in the asa and dry fire it acouple of times,
2.Make sure that the feild stip screw on the valve is not in too tight or too loose. fool around with it. either way can mkae the mag leak or fire im properly.
3. make sure that it is a leak down the barrel,

once I thought that my mag was leaking, when it acttally was my macroline.