when i degass my mag and try to remove the valve, it still holds pressure, even after shooting it till it stops and removing the macroline. the not alot of pressure, but enought to make removing the valve more difficult and push out the on-off a little. i cant seem to find the problem. its a classic valve with a lvl 10 and the ULE on-off. i dont think its the ULE because it never did this earlier with it being installed a year ago. help is appreichiated.
-
MY MAG, Ultra Jim
-----------------
ULE Body
Lvl 10
Classic Valve
ULT on/off valve
DYE Xcel Barrel
Quick Disconnect Thingies on the valve
88ci 3000psi Fixed Nitrogen System
Drop
12 Volt Revy -
when you say "degas" do you mean that you have an on/off asa without air bleed? if you just turn the air off and shoot the excess air there will still be around 600psi in your gun (not enough for a mag to operate, so you can't shoot it out), you can't get all the air out unless you completely remove the tank or get an asa with air bleed.
Comment