gun won't fire;level 10 or x-valve problem?

[kuyaryoga]

So a few weeks back my x valve was leaking and I sent to AGD for service. Got it back; shot sweet. Played, had a pretty damn good day of paintball.

Then i decided to change more stuff. Changed the stock rail and sear for a RPG Shadow rail and RT Pro sear. Also changed the ball detent on the ULE body.

Gassed it up and fired, Bolt blew forward and got stuck against the new detent. Degassed, unjammed it, tried again but now the gun won't fire. Turned the velocity up all the way, nothing. oiled the on/off pin and o rings, nothing. tried all different combinations of carriers, shims, and springs on the level 10, nothing. When i gas up the marker, the gun charges, I feel the on/off pin push the sear and the trigger rod pushs against the intelliframe trigger, but it won't fire.

stumped. Suggestions?

[whistl3r]

mayeb your field strip screw is too tight?

what on/off do u have?

edit: oh wait.. you changed the sear? you might have to retune your lvl10 to adjust? i dont really know so dont quote me..

[kuyaryoga]

mayeb your field strip screw is too tight?

what on/off do u have?

edit: oh wait.. you changed the sear? you might have to retune your lvl10 to adjust? i dont really know so dont quote me..

The On/off is the one the x-valve came with. What do you think the Field strip screw might be doing?

re: tuning the level 10...yup that's why I tried all teh different springs,carriers,shims combos...but no luck...