Added a little "TAC" to my Etac

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BigEvil
    www.BigEvilOnline.com

    • Feb 2005
    • 9333

    #1

    Added a little "TAC" to my Etac

    Im getting this beast ready for the West Point big game in April.

    My custom Tuna-built Etac. Now with a Lapco barrel shroud, on top of a custom Carter-doc-freak modified barrel. The stock is an old Crossman bb gun stock. I cut it, made a braket to mount it under the grip with, then attached the peice to the stock by inserting inside and filling it with resin plastic.

    The honey color in the front of the stock (by the grip) is the resin. It goes about 5 inches inside. Where it is exposed is where I 'built it up' to make the stock fit snugly with the back of the grip frame. I still need to sand some of the tape I used to mask the shape of the resing with, and then maybe a coat of flat black paint.

    In this configuration, I will have to run a remote. Im basically going to use it like this strictly for scenario games, so thats ok with me. If I find a drop that will let me put the tank on and clear the stock then I will probably try it.

    Everything all together.


    Shroud and Pro-Team battery pack


    Close up of the modified Crossman Stock


    Under the shroud
Working...