Quick Tank Question - Please Help!!

[Nate129]

Will this work with my X-Valved Mag?
Evil Tank
I already paid for it, but forgot to really ask if it will work with a mag...I was an idiot and it just slipped my mind...mostly because the auction says it's adjustable so it can be used with any gun.
Please please please say I didn't make a mistake...

[nyarlathotep]

Its all good as long as youre using macroline, but if you have SS hose youll have to change a fitting on the reg

[Nate129]

Just switched over to macro - so I am good.
600 psi is fine for the x-valve then? I thought I remembered seeing that they like 700-800 psi...
I already paid the guy, so I would feel bad if I backed out...

[Nate129]

I am supposed to pick it up tomorrow...

Am I 100% safe using that tank, or am I going to have problems with a 600psi input?

[Nate129]

So, guys, should I still pick this tank up - or is 600 psi just not going to be enough. I play mostly woodsball, so high rof doesn't really concern me too much.

Please let me know...

nyarlathotep, thanks for the help - I would like just to get a few opinions to be sure...

[kevdupuis]

A 600 psi output is too low to reliably run a mag on, you have a good chance of running into shoot down.

[Nate129]

A 600 psi output is too low to reliably run a mag on, you have a good chance of running into shoot down.

Even if I am only shooting around 5 bps?
The reason I am asking is because like I said, I already paid for the tank - and I got a GREAT deal...
AV Tank Stats
I know that says 550 psi, but it will go to 600 psi.
It's barely been used, and I paid LESS than 200 for it...a lot less...

[ThePixelGuru]

It probably won't work too well for your 'mag, but I'm sure you can get over $200 for it if you just resell it. See if you can trade it for a tank with a Flatline reg.

[Nate129]

Well, thanks for the help guys.
I am going to pick it up, because I at least need it for the weekend - if I don't like it I will just sell it or trade it for a tank that will work better.