Problem w/ onn/off assembly

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • theedge634
    Registered User
    • Feb 2006
    • 9

    #1

    Problem w/ onn/off assembly

    My first time troubleshooting a mag, don't have the gun on me right now, so details aren't perfect, but i'll try my best thanks for any help handed out

    Symptoms-
    Plug air in and there's no leaks everything seems fine. Pull the trigger and here a rapid succession of pops and then massive leakage can be heard, if i remember correctly once turned off, you remove the feild strip screw and but the assembly won't come out, so i remve the main body from the rail, and find the on/off pin sticking out so that the valve won't come out so then you got to find a screw driver or something thin and shove the pin back into the vlave body to be able to remove it from the main body.

    I may be a little off but i think i'm pretty close to accuratly reporting the symptoms any help on how to fix this would be great, like i said i've never troubleshot a mag before.
  • Dayspring
    aka- The Day Wang

    • May 2001
    • 9664

    #2
    Pull the trigger once the air is drained. That will push the on/off pin back in so you can slide the body out.

    Comment

    • Coralis
      Hyper Micro
      • Aug 2005
      • 1285

      #3
      also sounds like need to replace the on/off orings and check to ensure the on/off pin isnt upside down.

      Comment

      Working...