Need some help! ULT Stuff

[Benwa23]

Below is a photo of my Automag RT. I used to play paintballs back about 8 years or so ago with a Spyder, however, I am trying to get back into the sport, so I bought my uncles Mag. I remember looking at airgun.com and seeing the "Autogmag RT" listed as a gun that had to be changed in order for the system to fit properly, but I'm just not sure because there are so many types hehe. This RT DOES have the Level 10 bolt, and I am wondering if the ULT Trigger system will fit into it without having to do any milling or make any changes to the gun whatsoever. I'm really confused and I don't want to buy the system if I have to make any changes to the gun. If anyone could let me know that it will work with the level 10 already in the gun, please let me know, I wanna get back on that field immediately!

Thanks, Benwa

[nate2k191]

it looks like it has a black valve on it, which would be an x-valve, and if it has an x-valve you can just drop the ULT in the valve and go. It will also work on an e-mag valve, but if you have a retro valve it needs to be modified in order to fit.

[Benwa23]

After doing a lot of research lately, it seems that this particular automag that I have will not support an X-Valve, but seems to come stock with a Banjo Valve? If anyone can confirm this let me soon please. And if it is a banjo valve, the valve the ULT seems not to support also, will I need to in turn get a retro valve and have that milled to have the ULT? Any help is appreciated because im at a total loss of information right now lol, thanks.

[Beemer]

Its a Classic RT

The only valve that will fit is the valve thats in it. Its an original, the first RT valve. Just as good or the same as the X, E, Retro, RT etc... in performance. Although it is slightly different cause it runs the air through the rail, hence the banjo bolt rear rail screw, and the over all size of the valve itself is a little smaller then the others.

As you found you cant put the ULE trig in it. You will need a HPA Tank, adjustable or fixed with 700 to 800 psi out to run it. Not Co2, HPA only.

If the level 10 bolt is tuned thats all ya need to rock with this gun as is. Plus a decent loader.

Got a pic from the other side? Bet it has a hardline airline from the foregrip back to the rail unless your uncle changed it. Whats the serial number on it?

Any help is appreciated because im at a total loss of information right now lol, thanks.

No loss here. All the info is HERE just look or ask.

Hope this helps

Peace Out

___________

[Benwa23]

Yeah, here is a pic from the other side. I'm still a bit confused, is there any modifications I can make to have it so the ULT would actually fit? I like the idea of going from a 4lb pull *ish* down to the 15ounces.

The bolt is tuned and man it's great to not break a ball whatsoever hehe, that bolt is amazing. And I do have HPA, the tank is like 4k psi.

I don't know a lot about Automags, but I sure do like the quality thus far!

I appreciate the help, I have learned much already, thanks.