Anyone own a Retro Valve - please help

[ScottAl]

Hi,
I am looking to buy a gun with
Retro Valve with reactive trigger.
Just wondering if anyone has used this value and if it is any good at all?
Also they said it has a level 10 anti chop bolt. Does it really cut down on choping? . Just wondering if it is worth getting if it has a retro value and a lvl 10 anit chip bolt in it.
Thanks a lot!

[cpt]

Never breaks down or chops paint. You have to run nitro, no co2. Very fast, you need an electro hopper to keep up.

[Pyroboy597]

The level 10 makes it virtually impossible to chop paint. You can stick your tongue into the breech and fire and you won't get hurt. The level 10 literally bounces off the paintball if it is not aligned correctly at the time of firing, not damaging it at all.

[Yogster]

Scottal

"You can stick your tongue into the breech and fire and you won't get hurt."
You don't tell somebody new to mags that your able to do this without any experience.

Sure there has been demonstrations of people doing this to show how well the Level 10 works.But people that are doing this it isn't there first time setting up a mag either.Wouldn't want to imagine what would happen to your tongue if the level 10 wasn't properly installed and setup-up.

Don't get me wrong the level 10 works really well set up right but there is other ways of checking to see if it works.

Yogster

[shades]

I have a Minimag with a ReTro valve, Emag, RT, And A RT Pro. all are the same valve and hav LVL 10 and all are AWSOME. Come to the Light side of the Force.
I like mags A little.
HIGH Quality. Awsome Engineering. Tough. Two Major moving parts one is the trigger the other is the bolt. Nearly nothing to wearout. NO hammer. no valve getting hit by the hammer, no three way, no timing issues, no plastic parts. Simply simple, simply the Best. TWO bolt disassembly,and one of those to field strip the valve and that one is a thumb screw!