leaky mag

[welle_k]

I have a 68 automag classic. I installed a Level 10 power tube and it started working out just fine. THen after about 20 shots it started to leak and it got progressively worse until it was leaking very bad, I took off the CO2 and put it back on, and found out the same thing. THe CO2 comes out of the barrel white, my line is shorter than stock, does that matter?

Any IDeas????

P.S. I have had a lot of problems lately, I want to stay with Automags, do you recommend the Minimag or the Pro CLassic?

I also heard of Autocockers, could I gert some information please

[Coralis]

prolly need a smaller carrier for your Level 10 and since your running CO2 you probably should oil the heck out of it.

[rb211]

You will need to drop carrier sizes. You will have to do this until the o-ring is broken in. I had to change carriers 3 times on mine, but since then I haven't touched it. Make sure you don't have shims in it until the leaking stops and feed it lots of oil!

[Blake-san]

after doing the above things, you should probably just stop using CO2 on your mag...that would significantly remove most of your problems that you are having...