ult problem urgent

[Ares9989]

sorry if this has been asked a million times, but im playing tomorrow and want to use my ult.
specs
x-valve with level 10 tuned correctly
intelliframe
ule body
rt on/off or ULT

works with rt/on off with no problems. upon installing ult with 4 shims, gun leaks down the barrel, sear does not catch, and trigger is limp. someone help me please

[Lenny]

Do you have all of the necessary o-rings in place? Try cleaning and lubing it.

Sorry I can't be much more of a help.

[Cow hunter]

check your tank?

[BigEvil]

Try adding 2-4 more shims and see what happens.

[Ares9989]

i fed it lots of oil and it seems to work fine now, its not as bouncy as it used to be tho

[flyingpootang]

i fed it lots of oil and it seems to work fine now, its not as bouncy as it used to be tho

That is the trade off with the ULT your trigger is lighter, but you loose some reactivity. As for the shims the most you can use is 6 in total. The trick is to start with 6 and shoot it. If it goes full auto then remove 1 shim at a time until it stops. All mags are different and require fine tuning to get the most out of your set up.

[BigEvil]

That is the trade off with the ULT your trigger is lighter, but you loose some reactivity. As for the shims the most you can use is 6 in total. The trick is to start with 6 and shoot it. If it goes full auto then remove 1 shim at a time until it stops. All mags are different and require fine tuning to get the most out of your set up.

You can put more than six in if you can fit them. Adding shims in effect shortens the length of the pin. I took a file to mine :-)

[flyingpootang]

You can put more than six in if you can fit them. Adding shims in effect shortens the length of the pin. I took a file to mine :-)

Also I found you can use lvl10 shims combo to really fine tune it