Yay Got My E-mag!!

[zipity_Bop]

well after taking a breif two year leave from AGD and paintball period i decided to purchase another mag this time i went big and got a E-MAG i gt it for $350 and love it.
i have a couple of questions Wake Jake the person i purchases it from said i need a new bumper and power tube o-ring where can i get these?
i noticed the rail is ridiculously heavy can i buy a milled or lighter one of these?
when i turn on the gun it says AGD 3.2 i hit the bottom button and nothing happens but when i hit the top one it goes through sps ts and so forth is the bottom button made to do anything?
sometimes when i hit the back button to pull up the screen it will blip and send a random cofiguration of dots to the screen for a split second is this normal, if not is it broken? how do i fix?
and finally what ups do you guyz recomend

wow started off with one question.............
well any help will be appreciated

[Phantom_Mag]

www.themagsmith.com

You'll find all kinds of upgrades there, tons of rails, almost all should be uled. VERY LIGHT.

Bottom button goes through submodes top button goes through main modes. FOR EXAMPLE

Pushing the top button you will eventually get to a screen that says ACE 0
Now click the bottom button and it should go through that mode ACE 1 ACE 2 and back to ACE 0 depending on home many times you hit the bottom button.

This will work for all modes that have mulitiple options.

Id suggest picking up a rt style (where you have the trigger pin that screws into the rail, IE. NOT CLASSIC)rail from www.themagsmith.com that suits your visiual needs. They are all made out of agd rails, and will work perfectly in your marker, they are ULE'd to the MAX.

You can get the bumper and oring from storeairgun.com make sure its the right bumper for your valve, level 7 = blue level 10 = clear. Ohh and if you dont have level 10, get it.

[pbjoe02]

Cool, I got a really nice black ULE emag with a tunablade for 500 about a week ago. You can get the parts from AGD or tunamart. With the screen thing, I don't think anything is broken, it could just be a bug, or the magnet on the back of your trigger could be too close to the hall sensor, so adjusting it could fix that. If thats the only problem though don't worry about it.

[zipity_Bop]

alright well wake had said that the gun came with lvl 10 how do i tell the difference
and which rails will wok can you give me a list?

[REDRT]

You can get the bumper and oring from storeairgun.com make sure its the right bumper for your valve, level 7 = blue level 10 = clear. Ohh and if you dont have level 10, get it.

Blue bumper is for the classic valves like the 68classic/minimag valves
Clear bumper is for RTs like the Emag/X valves.

Level 7 or 10 isn't the desiding factor here. The valve is. Z_bop any rt rail will be the one you are looking for. If you see AM/MM that is a different rail than you need. Also check out the Level 10 sticky thread in the tech forum. You should be able to gather a vast knowledge of the Lvl10 anti chop bolt.