Tank Regulator ?

[HuD1Ni]

If I were to get some kind of tank regulator, like a micro max-flo or somthing would that starve the mag similar to that of a reg setup on a mag ?

also - do you need to adjust the internal regulator at all ? or is that set at the most efficient state.. otherwise if you do adjust it, is this done through the factory ?

[JRingold]

The Micro Max Flow regs, or any adjustable regulators that screw directly into tanks and are capable of high pressure output should be fine. You just don't want to have two regulators before the valve (one in the tank and one in-line).

The regulator in the Valve doesn't need a lot of maintenance. Oil in the ASA per the instruction manual. The only adjustment that can be made is in the form of velocity adjustment. I've had a Classic Valve since 1996 and the only thing that it has ever needed was an O-Ring kit after 8 years in storage.

[HuD1Ni]

The Micro Max Flow regs, or any adjustable regulators that screw directly into tanks and are capable of high pressure output should be fine. You just don't want to have two regulators before the valve (one in the tank and one in-line).

The regulator in the Valve doesn't need a lot of maintenance. Oil in the ASA per the instruction manual. The only adjustment that can be made is in the form of velocity adjustment. I've had a Classic Valve since 1996 and the only thing that it has ever needed was an O-Ring kit after 8 years in storage.

Awesome thanks... also without making more posts, I was looking through tom kayes site.. and came across A perfect circle paintballs.. and then i cam across water fill clear paintballs.. I couldnt find enough information on these I went to the PTI or w/e site.. and I cant find anything there.. I was wondering if these can be used as regular paintballs that can be shot at each other ? and if so where can I buy these ? there peppertechnologies place intimidates me