ULT vs RT on/offs - your preference

[fifthmag]

For all you guys that have tried both, which do you prefer and why?

My X-valve came ULT equipped, but as I'm about to get an MF1 I'm considering trying a stock RT on/off to play with reactivity a little. I've had fairly normal ULT chuffing issues which I worked through as I got to know the trigger better and reduced my short stroking.

I'd welcome your opinions.

[Dayspring]

I've played with both. I like both.

And technically, this isn't a "my gun is broken" post. It belongs in chat.

[fifthmag]

Thanks D, I'll repost there.

[Wizzman]

I need a stock on off because I am curiouse to see which one I would like better. So far the ULT is wonderful but I think I want to try the stock one to get more reactivity. I am using a max flo reg so I know the stock on/off would be better....

[REDRT]

I like the ULT better. I can consistantly be quicker with short bursts with it. I find I am considerably slower by the end of the day with a standared on/off vrs using the ULT for the day. I like the ULT so much I plan on having the Classic RT milled to except it.

[UltraMag527]

I like the ULT better. I can consistantly be quicker with short bursts with it. I find I am considerably slower by the end of the day with a standared on/off vrs using the ULT for the day. I like the ULT so much I plan on having the Classic RT milled to except it.

who does the milling?

[REDRT]

who does the milling?

I was going to send mine to Brad Q. Nestle at Paintball Maxx in Houston Texas. I'd trust him to do it right. AGD doesn't support this and if it gets dinked up I'm out a valve. Being the Classic RT is rather unique it might be very difficult to replace it.

Link

[flyingpootang]

For all you guys that have tried both, which do you prefer and why?

My X-valve came ULT equipped, but as I'm about to get an MF1 I'm considering trying a stock RT on/off to play with reactivity a little. I've had fairly normal ULT chuffing issues which I worked through as I got to know the trigger better and reduced my short stroking.

I'd welcome your opinions.

Get a SpyderMag conversion from lukescustoms.com You will never have short stoking problems again and with a T-board/Ramp chip it'll keep up with anything out there.

[fifthmag]

Get a SpyderMag conversion from lukescustoms.com You will never have short stoking problems again and with a T-board/Ramp chip it'll keep up with anything out there.

Many thanks Flying P, but mechanical is the life for me.We play mostly limited paint, so super ROF's aren't much good for what I do.The spyderMag conversion looks like a low weight alternative to the E mag though. Thanks for your input!

[Dark Frost17]

i cant seem to get the rt valve to work right with 1 of my xvalves....it just doesnt get along with it.......
i have been sticking with the ult