want to go electiric

[autopimp187]

i have been out of paint ball for a couple years and am getting back in. my ? is

i have a classic mag with the retro valve and a level 10 bolt, that i want to convert to an electronic trigger frame(similar to the emag). how do i do this, and how much will it be?
thanx for the help

[Resurection]

Simple answer would be to upgrade to a Hyperframe. I believe they are OOP, but can be found online for sale.

Another option is to jump all the way to the 'Devilmag' (do a search if you are not familiar). Only available via buying a spot in line or from one of the very few existing owners.

If you are interested in making the big jump to electro and staying with a mag, these are your only real options I am aware of.

If you DO decide you like the Devilmag, check out my sale thread here.

[bleachit]

you could also try the modding of a spyder/clone e frame.. or have luke do it for you, to work with your mag.

[shades]

Centerflag and BOOYah made an eletronic gripframe for the mag. but no long do. some time you can catch them for sale here in the buy and sell section or on Ebay. I wold wait for a commercial version of the Hair trigger (all pneumatic) to come out but it is a long time coming. for more info check HERE.

[peewee]

Hit up luke ,

http://www.lukescustoms.com/page0024.htm

[autopimp187]

after taking a look around for the money i was thinking of going with one of two things, the hyperframe for about 200 or should i buy the intelli frame and trigger job from agd also about 200.00 keep in mind i do have a retro valve not the x valve
thanx for your opinions

[autopimp187]

also what exactly is the intelliframe all the website descriptions are a little vague, what i got from them is a slightly shorter trigger pull, and hook up to hopper so hopper spins everytime you pull the trigger
thanx

[Coralis]

You might have a problem, most electric frames (emags excluded) require the use of the ult because the small pancake solenoids cant manage the trigger pull as I recall the retro valve can not use the ult (not sure if the valve can be modified to accept one) see the stickied thread ULT thread

Intelliframe ... mechanical frame with a switch that connects to the hopper to spin the agitator every time the trigger is pulled made by AGD

[JRingold]

You could also look for an e-mag, if you don't want to upgrade what you have. If you buy a used one, it's probably less expensive than if you upgrade your current. I found that out personally. Then I also went out and bought two X-Mags last year.

[autopimp187]

bought the intelliframe and ult, still not impressed everyone on the field had an ion it seemed, i do not want to go that route, am looking for a electric trigger frame to buy email me at [email protected] and let me know

[Mescalito]

ive got my mag's trigger performing in the realm of electros. 1/16 of an inch pull and light as an electro too. 100% mechanical. xvalve + ult + pneumag frame. Dont think that you HAVE to put batteries in your marker to make it sing..

[flyingpootang]

You could also look for an e-mag, if you don't want to upgrade what you have. If you buy a used one, it's probably less expensive than if you upgrade your current. I found that out personally. Then I also went out and bought two X-Mags last year.

I did the same. Best bet is to sell it and get a Emag. I have seen them in great condition go for 350.00 here on AO. If it's still not fast enough you can wire in a Mini Morlok and it'll be as fast as anything out on the field.