classic power feed on rt pro rail

[rtfire1]

i looked and did not see a post about this so here is the question.

My bro's friend wants me to put a power feed body on his rt pro rail he picked up.

i am thinking i can grind it to fit but i thought i might ask if any one eles had an idea.

[Stealth Fighter]

i looked and did not see a post about this so here is the question.

My bro's friend wants me to put a power feed body on his rt pro rail he picked up.

i am thinking i can grind it to fit but i thought i might ask if any one eles had an idea.

You shouldn't need to grind it, you might need to tap a hole, but you definately need to have him buy:

http://store.airgun.com/index.cfm?fuseaction=catalog.prodInfo&productID=182&categoryID=90

[FinchMan]

and the RT sear & axle.

[Stealth Fighter]

and the RT sear & axle.

I'm pretty sure you could get a classic sear in there if you wanted to, atleast this is what I'm told.

[rtfire1]

got all the parts just need to make the part of the power feed that go's in to the rail round not oval

[shades]

I have a Mini Mag power feed on my Emag. I filed the nubbin round and it works fine.

Great For the Warp.

[rb211]

You will need to get a RT sear and axle. The classic sear & pin won't work.

[Phantom_Mag]

Ive ground down plenty of those bodies to fit rt rails. Thats all you have to do.

[wanna-b-ballin']

yep. just grind that square peg to be round. it works great.

[rtfire1]

thanks thats what i am going to do this afternoon when I get home from work.

[luke]

Grinding it it just silly, why not mill the rail?

There is a guy here that will do it for cheap.

[rtfire1]

because it is free to grind it i just got to stop over and see my dad and use his tools (they wanted 30 bucks to mill it and it might wreck the rail)