Got a new mag with a issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • goast5674
    Registered User
    • Mar 2006
    • 4

    #1

    Got a new mag with a issue

    i just recieved my new rt pro....went to hook up the air and it leaks. the leak is coming from where the tank conects to the gun, i've tried 4 diffrent air tanks, they all do it. how can i fix this?
  • MoeMag
    Still here.
    • Dec 2005
    • 1821

    #2
    A: Macroline elbow fitting. Specifically where the macroline goes into it.
    Remove the line, inspect the end for any burrs or splits, if any cut off bad end or replace line. If none replace the macroline into fitting, then pull on it gently to properly fasten it. If it still leaks replace the macroline elbow (about $5.00).

    B or C:D:

    Comment

    • Cow hunter
      300fps=204.54mph
      • Aug 2005
      • 1521

      #3
      try thread tape, on everything, tank, macro fittings everything

      Comment

      • goast5674
        Registered User
        • Mar 2006
        • 4

        #4
        Moemag the leaks take place at C in your pic

        Comment

        • Dayspring
          aka- The Day Wang

          • May 2001
          • 9664

          #5
          Got an oring on your tank?

          Comment

          • goast5674
            Registered User
            • Mar 2006
            • 4

            #6
            yes there is an oring...and its good

            Comment

            • Coralis
              Hyper Micro
              • Aug 2005
              • 1285

              #7
              an easy fix is to put a bottle Oring in the bottom of the duckbill adaptor and then screw the bottle in .... when the bottle is screwed in the top of the bottle will seal up against the oring and should take care of the leak, also it will help prevent the bottle from backing out while playing

              Comment

              • goast5674
                Registered User
                • Mar 2006
                • 4

                #8
                the oring in the asa worked...thkx a bunch

                Comment

                • MoeMag
                  Still here.
                  • Dec 2005
                  • 1821

                  #9

                  Comment

                  Working...