Is it possible? ULT on Emag?

[RavishingEddie]

Hello everyone, maybe this is a bad question, but I was wondering if I can install a ULT on my Emag for the Mechanical side of it. The Emag is awesome on Electrical, I have no problem whatsoever with that and am very happy. I just wanted to know if I can make my the mechanical function shoot faster.

[Remington]

I've played with one installed on an E-mag (not mine) and it worked very well! From what I understand though, it works on a case to case basis, so give it a try and tell us about your results!

[Dark Frost17]

i have 1 on my emag with no problems.....i thought u where suppsed to use the RT on off though...

[shades]

The ULT is NOT recommended for the Emag due to the decrease in recharge rate. The on/off is what resets the selonoid with a ULT it reduces the reactive trigger reducing rate of fire. Plus it not recomended By AGD. I personally think you are going to end up bending the the ULT pin at high rates of fire, then you will be done until you get a new pin. If it works in your marker Great. But now you know the risk. Don't boo hoo when you break your $900 marker.

[ThePixelGuru]

Well, the risk is to the ULT itself, correct? You're only risking an on/off pin worth a couple of bucks. Just keep your stock on/off with you at the field and stuff and you won't have any problem. Right?

[syl58]

i had the same question because i had a mech marker with ult and just bought emag lowers.


it looks like tunaman and a lot of other people say that you should use the EMAG on off and need a "quad oring" which is unique to the emag. the rt one i think will work but you need to get the right sized pin, which is is think .712 where the rt on is .750

i just bought one off tunaman so i dont ruin anything

[Dark Frost17]

lost...

Can some 1 please show me a picture of the right 1 i should be using....i have 2 on-off's the ult and one that lookslike the RT on off... when i put it in my marker goes like fullauto when i pull the trigger and does not stop..., so i put the ult in with no problems

[shades]

YOU need this, this and
this

[Dark Frost17]

ok i have 3



2 of them are the same size but the 3rd is shorter.....what 1 do i use?
i do not rember the 1 that made it go full auto when i aired it up

[Dark Frost17]

???

anyone?

[Tunaman]

You cant just guess on pin size. It SHOULD be a .712. and make sure you put the 2 orings in if you aren't using the ULT. The ULT pin is too long for an emag. You will have problems if you use it. You need either a Micrometer (0-1") range is great for pins. Or you can get a cheap pair of digital Calipers to do the same thing. Every Mag owner should own one.

[Dark Frost17]

You cant just guess on pin size. It SHOULD be a .712. and make sure you put the 2 orings in if you aren't using the ULT. The ULT pin is too long for an emag. You will have problems if you use it. You need either a Micrometer (0-1") range is great for pins. Or you can get a cheap pair of digital Calipers to do the same thing. Every Mag owner should own one.

Okay.... i will take it to work tomorrow to use the micrometer....(dont have 1 at home)..i was not aware that a oring went around the funny shaped black oring .....

Thanks

[Dark Frost17]

ok

i have 2 pins that are .712 and the shorter is .645....i got everything working great.....way faster then it was with the ult and no chuffing......

but my question is what woud that shorter pin be used for?

[Dayspring]

Micromag pins are that short.