A few emag questions

[Bruizer]

Its looking like i will be getting a polished powerfeed emag in a trade, and i have a few questions. Please bear with me and tolerate my lack of knowledge of the emag.

how adjustable is the trigger? compared to that of the angel i own.

besides buying a ptp micro emag, is it possible to get emag body that accepts cocker barrels?

as part of the deal i am getting a agd warpfeed for an emag, cept i dont see the hookup from the warp to the board, does that have to be purchased separetaly? and where?

i was really impressed with the one i used at last years iao, it had the stock barrel, those of you who use one, what barrel do you recomend for it?

how bad is the emag about chopping, really,? i didnt notice any out of the 500 or so i put through one.

ok thats all i can think of, thanks for your help guys.

[a_malfunction]

Trigger can be as short as .3mm. I can't use an actual measurment for the weight of the pull, but it can be just as light as an angel.

The nex Extreme and the SFL emags (along with the PTP emags) take cocker barrels as well.

The warp hook up cable can be purchased from AGD. It might be in the online store as well.

the stock barrel is pretty decent.... Any high quality barrel would do.... Lapco, CP, DYE, etc......

Emags break no more paint than any other gun. Sure it will chop if you out-run your hopper (which is oh-so easy to do!) or forget to turn the hopper on. But what gun wouldnt? I wouldnt worry about it. Especially if you are getting a warp. Once you get your warp dialed in, the likelyhood of chops that arent due to user error is exeptionally low.

[headcase]

How many adjustments does the Angel trigger have? The Emag trigger is adjustable for lenght of pull, firing point, and return strenght.

It's coming in the form of the E-mag extreme, but there are still kinks being worked out before the marker is released, and then it will be a while longer before replacement bodies for normal mags and e-mags are available.

When you call to register the marker with AGD ask them to send you one. People have reported getting them for free, but I've paid 15.00 for the two I've had.

the number is (847) 520-7507


Any barrel that you like with other markers will work basicly the same on the E-mag. Currently I'm using a set of CP one piece barrels with 3 different bores with good success.


People that have chopping problems usually out run their loaders, you'll have no problem with the warp. I've had 2 E-mags, one PTP and one AGD, a couple of cases total threw them, and I haven't broken a ball, nevermind chopped one.


Enjoy the E-mag!!!!! Welcome to AO

[headcase]

I hate when someone replies while I'm typing!

[LaW]

Originally posted by headcase


When you call to register the marker with AGD ask them to send you one. People have reported getting them for free, but I've paid 15.00 for the two I've had.

the number is (847) 520-7507




Enjoy the E-mag!!!!! Welcome to AO

I was told when I called AGD that they will now be including the interlink cable with all new emags!!!

[Bruizer]

thanks for the info so far guys. Keep it coming, im all ears.