My first automag an i need some help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MINI0N
    Registered User
    • Apr 2006
    • 2

    #1

    My first automag an i need some help

    I just got my very first automag an RT from a buddy of mine for a very low price but i'm not shure wats wrong with it it's leakin out the front of the valve, if any body can give me any tips on wat might be wrong it would be appreciated, plus he didn't give me the manual so i was wonderin if anybody knew where i could down load one i would also really appreciate an exploded view. thnks for ur time and help.
  • MoeMag
    Still here.
    • Dec 2005
    • 1821

    #2


    Original RT diagram is on page 4 of this...

    Comment

    • bit-wizard
      Registered User
      • May 2005
      • 205

      #3
      Air it up and pull and HOLD the trigger in. Hold it like this for a minute. If there is no leak, or if the leak stops during this time, then the problem is most-likely the power-tube o-ring (inside the power tube tip). Either oil it good, or replace it and your problem will likely be fixed.

      bit-wizard

      Comment

      • MINI0N
        Registered User
        • Apr 2006
        • 2

        #4
        thnk you very much guys i really apreciate it

        Comment

        Working...