Emag doing weird stuff.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MoeMag
    Still here.
    • Dec 2005
    • 1821

    #1

    Emag doing weird stuff.

  • BigEvil
    www.BigEvilOnline.com

    • Feb 2005
    • 9333

    #2
    check to see if the trigger magnet is a little too close to the hes.

    also check to make sure the battery if fully charged and still good.

    Comment

    • MoeMag
      Still here.
      • Dec 2005
      • 1821

      #3
      Batt is on the charger right now... should get a green light anytime now. So I will check that.

      Hes mag:
      If i hold the gun up and look at it exactly perpendicular, the trigger magnet sticks out about .52 of a mm on the bottom and is flush with the trigger at the top... is that too close?too close?

      edit: Green light...
      gassed it up and it still does the same thing... will pull the hes mag out some...

      EDIT 2
      pulled it out about 1 mm... still doing it.

      Will stop for now, my tank is getting low.
      Noticed it doesnt do it while there is no air...
      Last edited by MoeMag; 04-14-2006, 05:37 PM.

      Comment

      • nate2k191
        texas a+m maroon
        • Feb 2003
        • 1170

        #4
        if you want to experiment to se if its the trigger magnet, which it may be, just take it out. then put it on the tip a screw-driver and swipe it by the hes sensor once the gun is on to fire.
        -fully upped mech mag (magzilla) www.havoc-online.com
        -upped 68 mag (class) My Feedback AIM = nate2k191
        -live in peace TK-
        AO-TX

        Comment

        • MoeMag
          Still here.
          • Dec 2005
          • 1821

          #5
          Gun is still acting up... anyone what is the cause for this?

          Comment

          • Def Jeff
            JMJ Factory Vik #02
            • Nov 2004
            • 134

            #6
            Make sure the battery contact (positive terminal) is tight. Mine wiggled loose and it did some interesting stuff.

            Could also be that you just need a reflash, not sure though.

            Comment

            • MoeMag
              Still here.
              • Dec 2005
              • 1821

              #7
              SOMEONE PLEASE

              I was shooting all this weekend and it was going nuts! It only happens when there is air running through the gun.

              Is this because the solenoid?

              Comment

              • athomas
                Of course it works-its AGD
                • Jan 2002
                • 8039

                #8
                What exactly is it doing and what have you tried doing to fix it? Remove the magnet from the holder in the back of the trigger. Fire the gun in manual mode without the magnet installed. If it fires in manual mode and nothing on the screen is messed up, then you know it is a trigger magnet problem.
                Except for the Automag in front, its usually the man behind the equipment that counts.

                Comment

                • MoeMag
                  Still here.
                  • Dec 2005
                  • 1821

                  #9
                  Woot!
                  I figured it out... jacked up the shot buffer.I'm new to e-mags, what can I say... I was looking for a mech problem.
                  Wow wee is it fast. I was thinking about getting a new gun but now IDK I think this will work for me.

                  Comment

                  Working...