Clueless here assembling a Mag

[cbg]

i used to sell autoparts/stereo etc a few years back and a customer bought some stuff off me and on a promise to pay, well, to make a long story short, he never paid so he offered his gun to me as a form of payment, its been prolly 2 years or so and i've never even used it or assembled it completely and now i'm considering getting back into paintballing as a hobby...unfortuneately, its been years since i've assembled a gun and my previous guns were not complex and easy to figure out, i've taken some pics and can get more pics/better ones if needed, but can anyone help me out w/ what i've got and how it all goes together!!!

[TheAngryDrunkenRussian]

go to the Airguns desgin web site and download a manual for free.\

EDIT:

http://www.airgun.com/Images/automan.pdf

Page 13 shows how every thing fits together.

[cbg]

i think i've got the bolt/valve/etc figured out, as well as how to run the air lines to the valve, but i can't figure out the trigger

[BigEvil]

im not 100% familiar with those BooYaa eframes, but more than likely, you will have to take the trigger rod off of the sear.

Also, to get that frame to trip the sear, there is a special on/off that you would need. The stock one is way too heavy for that little 9v noid to move. If the gun didnt come with it, you can get a ult on/off.

If you want to make life a whole lot easier for yourself, pick up a cheap mechanical frame and get the rest of the gun working first. Then you can see about the e-frame going.

[cbg]

im not 100% familiar with those BooYaa eframes, but more than likely, you will have to take the trigger rod off of the sear.

Also, to get that frame to trip the sear, there is a special on/off that you would need. The stock one is way too heavy for that little 9v noid to move. If the gun didnt come with it, you can get a ult on/off.

If you want to make life a whole lot easier for yourself, pick up a cheap mechanical frame and get the rest of the gun working first. Then you can see about the e-frame going.

thank you very much, i have a cheap mech frame here i'll work with, i've also got a question about the bolt/valve, as you can see, i have two bolts(at least i think they are called bolts) one looks just like the one in the manual from airguns but when it is on it goes beyond the ball loader, or when i add the power tube tip assembly to either it does the same

[paintman1142]

here you go:





Easy as pie, but shoots a lot faster!!!

[paintman1142]

the one where the bigest part is rounded and has a black foamy is the one it looks like you want to use, it's the level 10 bolt and it seems you may have everything else installed for it, it's good, if tuned right it means no chops and you can fire with your finger in the breach first, but try it with something other than your finger first

[cbg]

okay, aside from the trigger, i've got everything figured out, i still dont understand how to even get a mechanical trigger to work, yet alone my electronic one (

[cbg]

mechanical trigger figured out, unfortunately i don't have anything to supply this thing(co2 or n2) does ne1 know where i can find what i need to make my electronic trigger work or a pic of what it looks like as i may already have it?


so here are the two barrels i have, which one is stock and which one isnt and which is best!?

[BigEvil]

Actually neither are stock, both are pretty good.

[cbg]

Actually neither are stock, both are pretty good.

sweet :-D so is this gun worth nething? and ne idea as to where to get the ULT on/off

[cbg]

well....i found a picture of an on/off and i've got one sitting here, w/ all the other mods, you think its safe to asume its already been taken care of? i know the guy used to run N2 and have all this stuff together and working at one point in time

[paintman1142]

do not get the ULT unless you have an x-valve, or i think a rt-valve (correct me if i'm wrong) I put a ULT in my classic valve when i first got it and sure it makes the trigger really light but in the classic valve it missfires a lot and you have to wait for it to reset itself.

bottom barrel is an all american, event though it is two piece, that one may be an older one where the two pieces are glues toghether and not threaded, so dont go bashing it into any bunkers real hard, thought you might like to know!

[Coralis]

do not get the ULT unless you have an x-valve, or i think a rt-valve (correct me if i'm wrong) I put a ULT in my classic valve when i first got it and sure it makes the trigger really light but in the classic valve it missfires a lot and you have to wait for it to reset itself.

if you are shooting a mechanical trigger you dont want the ult in there but with the E frame you will most likely need it or the gun probably wont cycle properly (hopefully it came with the gun already)