simple noobish question

[bam wannabe]

so im trading a stock 03 cocker for a minimag with level 10, and intelliframe.

question is, minimags are compatable with every other mag part out there, right?

like if i bought a ULE body, i can throw all the stock minimag parts i have now onto it or will i need a different rail and stuff like that?

and secondly, since i have a level 10 bolt already, would i just need to buy an rt valve and it will be equivelant to an x-valve?
or is there some difference between an x-valve and an rt valve with level 10?

[warbeak2099]

You can indeed just slap the ULE body on. You simply need to pop out the twistlock assembly in the rail.

As for the valve you are correct. The only difference is weight and that the X-valve can accept the ULT on/off. However, if you get an Emag valve instead of an RT, you can use the ULT. Then the only difference is weight.

[PBCapo]

As for the valve you are correct. The only difference is weight and that the X-valve can accept the ULT on/off. However, if you get an Emag valve instead of an RT, you can use the ULT. Then the only difference is weight.

This isn't necessarily true, the on/off chamber in some emag valves still won't accept a ult. Basically, the earliest rt and emag valves need to be milled slightly to accept a ult, while the newer ones, closer to the time the x valve was released, do not need milling