Armageddon users

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • temilotzin
    Little Huitzil XT00354
    • Mar 2003
    • 204
    #1

    Armageddon users

    I recently got a used Armageddon air system off ebay and the pin valve on the bottle portion leeks air at 1000 psi or greater. It does not affect the functionality since it does not leek when attached to the regulator, but it makes it impossible to store the tank with air in it. Do any of you seasoned geddon users out there have a fix for me?
    Tags: None
    • temilotzin
      Little Huitzil XT00354
      • Mar 2003
      • 204
      #2
      What no Armageddon people out there?
      Last edited by temilotzin; 05-06-2006, 08:59 PM.

        Comment

        • Shane-O-Mac
          Registered User
          • Sep 2002
          • 1045
          #3
          The seat needs to be flipped. It is the ONLY AA product you can flip the seat on. If that doesnt work find another seat. Mag seats WILL NOT work on the HP side, they are way too soft.


          Shane-O
          I have nothing good to put here...........


            Comment

            • GoblinGreen
              Gobbling Green Goop
              • Nov 2000
              • 99
              #4
              I have the same bottle. Mine also leaks when I put the output pressure above 1000psi.
              I found that the guage on the side was buggered, when I tested the output pressure it was going to 1200psi before it leaked.

              Shane-o-mac is right about the reg seat, It looks the same as a regular classic mag reg seat. I didn't realise you could not use a mag one though cause I never changed mine.

              Check your output pressure properly dont just believe your few years old guage.

                Comment

                • sniper1rfa
                  (Not a Wang Force member.)
                  • Aug 2001
                  • 1107
                  #5
                  the reg seat needs to be flipped or replaced.

                  And yes, it is still leaking when its on the reg, since the bottle side is half of the reg. You will be getting a boatload of creep using it like that.
                  "The Fine Print: Discontinue use if your eyeballs suddenly get way smaller."

                    Comment

                    • temilotzin
                      Little Huitzil XT00354
                      • Mar 2003
                      • 204
                      #6
                      I tried flipping the reg seat around but that did not seem to help any. So I stretched out the valve pin spring out and that seemed to stop the leak. Not sure how long that is going to work though, anyone know where I can get a replacement spring or replacement in general?

                        Comment

                        • TheAngryDrunkenRussian
                          Owner Grounds Master Co.
                          • Sep 2005
                          • 586
                          #7
                          Proshop - Sry I don't mess around with HPA tank valves. For me it just seems to dangerous to have something wrong happen.

                            Comment

                            • Shane-O-Mac
                              Registered User
                              • Sep 2002
                              • 1045
                              #8
                              It is proabably still leaking, or you torqued the reg seat down better the second time around. That spring is nothing more than a guide for the pin. The tank puts full tank pressure to the pin. that spring wont change anything as long as its in there. Take some alcohol and fill the top of the tank where the seat goes and see if any bubbles show up, watch it for 5 minutes or so. Sounds like you may have got it set right when you took it apart and stretched the spring. There is someone selling parts on ebay, but you will have to find them.


                              Shane-O
                              I have nothing good to put here...........


                                Comment

                                • Nobody
                                  Nobody's Perfect
                                  • Oct 2001
                                  • 3384
                                  #9
                                  i have Geddon seals, reg seat and springs. i can let go for $5 shipped. these are brand new. i do have paypal.

                                  Nobody
                                  OMHW

                                    Comment

                                    • temilotzin
                                      Little Huitzil XT00354
                                      • Mar 2003
                                      • 204
                                      #10
                                      Originally posted by Nobody
                                      i have Geddon seals, reg seat and springs. i can let go for $5 shipped. these are brand new. i do have paypal.

                                      Nobody
                                      OMHW
                                      Thank you Nobody, your Geddon kit fix the problem!

                                        Comment

                                        Previous template Next
                                        Working...