rt mag bounces way to much. I have tried adding up to 6 shimsand removing shims down to two and still cannot get it tourney legal. what is the next step?
-
-
Ult
Are you using a ULT
Originally posted by tweeder -
I assume you have a ULT...
If the ULT is new, it need to be worn in. After 1000-2000 shots, the reactivity can lower.
Remove shims to lessen reactivity, you can remove all if you want to.
What input pressure do you have? 750-850 psi should be fine, but if you allready have that, maybe you can lower it. I doubt that it will cycle at lower than 650-700 psi.Comment
-
put the stock on/off back in and see if it goes away. If it doesn't, then check the sear/bolt for wear. Let me know...Comment
-
yes I have the ult. the gun has no reactivity at all with the stock on off, that is why i got the ult. But the trigger was way too stiff with the stock on\off.Comment
-
Theres really not much you can do then...Originally posted by tweeder
Try and get away with the ULT, and once you get warned, put the stock on/off in! 
*Dont sue me if you get in trouble.*Comment
-
no lawsuits
all of these guys in oklahoma know that my gun is out of control, the good news is that I can use it in scenerio games. keep putting the info here for me if anyone has it. I will try just about anything with my gun to make it legal
Comment
-
Nevermind
Comment
-
folks I still need some help with this problem so if you got any ideas let me know. If you have a reputible shop I will send it to you and see if you cant tune it for me. all I ask is that you tell me what you had to do that way I can get it back to bouncing for scenerio tourneys.Comment
Comment