i was playing paintball yesterday and halfway through the day my trigger began to stick and the pin seemed like it wouldnt come out.... Then to make things worst the gun started leaking from somewhere near the bolt and it seems like an O ring but im not sure.. The air seems to be coming from the bolt and is being pushed out towards then barrel... wat should i do?
-
-
Does this valve have a level 10 kit on it. If so try a bigger carrier. If it has level 7 try a shorter spacer. Also put 3 drops of oil in the asa and one into the Oil Holes. -
Put 5-6 drops of oil in your ASA, see if that fixes it. If that doesn't stop it, if you have LVL 10, go 1 size DOWN, not up, on the carrier. Oil it again. If you have a ULT, oil that too. Make sure your tank pressure isn't low (mine leaks if I go below 800psi). If you have a level 7 bolt, change the power tube o-ring before you go messing with spacers, if it continues to leak, go down a size on the spacer.Comment
Comment