ult in a RT valve

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • braaatz
    member
    • May 2001
    • 206
    #1

    ult in a RT valve

    What is the modification needed to install a ult in a RT valve?
    With this modification can a RT on/off be reinstalled?

    I have done a search on this , but what I want to know is what
    the actual mod is. I am a machinist and I was considering doing
    this myself. Is this modification simply boring out the hole/c'bore
    to accept the ult on/off? If so can this dimension be taken from
    the ult on/off and machined for a slip fit? Does anyone know these
    dimensions?

    I would appreciate any info on this.
    HR minimag
    Benchmark rail(red)
    Drop zone 2(red)
    Blade INTELLIFRAME
    WARP feed(clear)/12v Rev
    114 crossfire hps
    10" dye ss barrel
    Tags: None
    • snoopay700
      Serious About Men

      • Jan 2006
      • 3071
      #2
      Originally posted by braaatz
      What is the modification needed to install a ult in a RT valve?
      With this modification can a RT on/off be reinstalled?

      I have done a search on this , but what I want to know is what
      the actual mod is. I am a machinist and I was considering doing
      this myself. Is this modification simply boring out the hole/c'bore
      to accept the ult on/off? If so can this dimension be taken from
      the ult on/off and machined for a slip fit? Does anyone know these
      dimensions?

      I would appreciate any info on this.
      The hole for the on/off needs to be drilled so it can accept the x-valve on/off meaning so it has a big bottom oring as well. With this done, you void the warranty and you need an extra o-ring to put the onld on/off in, but it can be done.
      Il n'y a point de sots si incommodes que ceux qui ont de l'esprit.

        Comment

        • Shotcaller509
          It's The "M.O.B" Boy!!!
          • Mar 2006
          • 121
          #3
          Braaatz, If you want to know the exact specs on the needed boar size you can E-mail brad from paintballmaxx in Houston at [email protected] I personaly sent my RT valve to him so that he could rebore it for a ULT. The specs were perfect, dropped a ULT in and worked like a charm, no leaking or nothing. If you want to put the old on/off in all you need to do is put in a couple orings at the bottom of the rebored hole in the valve since it is a new size. I sent out my valve on a monday, and got it back on a thursday the same week. All he asks is to send your valve to him plus $20 and that will cover the bore of the valve, and shipping it back to you via Priority. Its a great deal, and personally I would'nt play with out the ULT. Its like night and day. Well hope this info helps you out. good luck, Shotcaller509


          Originally posted by snoopay700
          The hole for the on/off needs to be drilled so it can accept the x-valve on/off meaning so it has a big bottom oring as well. With this done, you void the warranty and you need an extra o-ring to put the onld on/off in, but it can be done.

            Comment

            • braaatz
              member
              • May 2001
              • 206
              #4
              thanks to everyone for the information
              HR minimag
              Benchmark rail(red)
              Drop zone 2(red)
              Blade INTELLIFRAME
              WARP feed(clear)/12v Rev
              114 crossfire hps
              10" dye ss barrel

                Comment

                Previous template Next
                Working...