Shortstroking??

[JRingold]

I'm having some shootdown issues with an RT-Pro, ULE-Trigger.

Could it just be that I'm short stroking the thing, or is there something simple I should check out?

[athomas]

You could be short stroking, but it may not be all your fault. If the level 10 or the ULT is not properly tuned, they could slow down the bolt when it is resetting. This could lead to lost recharge time before the next trigger pull which could then result in a lower chamber pressure and lower velocity.

Check your level 10 operation first. Make sure you are using the largest carrier that doesn't leak.

Also, make sure your bottle is outputting enough pressure to the valve. The higher the output from the bottle the better the recharge you will get from your valve. 850psi or higher is recommended.

[JRingold]

You could be short stroking, but it may not be all your fault. If the level 10 or the ULT is not properly tuned, they could slow down the bolt when it is resetting. This could lead to lost recharge time before the next trigger pull which could then result in a lower chamber pressure and lower velocity.

Check your level 10 operation first. Make sure you are using the largest carrier that doesn't leak.

Also, make sure your bottle is outputting enough pressure to the valve. The higher the output from the bottle the better the recharge you will get from your valve. 850psi or higher is recommended.

Thanks for the assistance. I've narrowed it down to either the inpt pressure or my shortstroking. I have to get my other tank filled, as I can't seem to get my MacDev adjustable regulator to stay "on" when the pressure is set higher than 700psi.