Leaking Behind Trigger

[leitchd]

Hi.I have noticed with my Mag there is a leak behind the Trigger .Now The leak occured when the trigger sear was not touching the on/off pin .Could it be something with my sear or is it an on/off issue, even thought just to buy a new bolt .Any Help would be great cause it's really annoying to keep refilling my tank over and over.Set up is as Follows I'll try and get some pictures.

Dye Double Trigger Frame Chrome
Dye Double Trigger
A.N.S air valve
Dye Izon Sight
32 Degrees Drop Foward
A.N.S Venturi Bolt
Two Piece All American Green
Stock On/off (Older one)
High Pressure pistion
Green AGD Sight Rail
Have Reactor Valve
A.N.S Velocity Adjuster

[athomas]

Leaking behind the valve is an indication of a leaking on-off assembly. The leak concerns two orings. They are the larger oring around the bottom half of the on-off assembly, and the smaller oring inside the bottom half of the on-off assembly. Replace (preferred), or at least clean these two orings and your leak should go away.

[Hooter42]

Leaking behind the valve is an indication of a leaking on-off assembly. The leak concerns two orings. They are the larger oring around the bottom half of the on-off assembly, and the smaller oring inside the bottom half of the on-off assembly. Replace (preferred), or at least clean these two orings and your leak should go away.

Yep I Second That, Just had this problem.